Electronic Electric Sleeve Control Valve
Electronic Electric Sleeve Control Valve
Nominal Diameter: DN25 ~ 300mm
Nominal Pressure: PN0.6 ~ 6.4MPa
Working Temperature: -40 ~ 230 ℃ (room temperature type), heat sink type 230 ~ 450 ℃ (medium temperature type), special order -100 ~ 600 ℃
flange dimensions: meet JB78-59, JB79-59, JB / 79.1-94, JB, ANSI, JIS, DIN standard production orders, etc.
body material: WCB (ZG230-450), ZG1Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti CF8 CF8M
First, The Electronic Electric Sleeve Control Valve Overview
ZDLM Electronic Electric Sleeve Control Valve by the PS series or 3610 series of straight-stroke electric actuator and low flow resistance through the single seat valve. (Also with other brands straight trip actuators). The electric actuator is an electronic integrated structure with servo amplifier, input control signal (4-20mADC or 1-5VDC) and power supply to control the valve opening, to the pressure, flow, level, temperature and other parameters adjust. With the action sensitive, simple connection, large flow, small size, high precision adjustment. Control accuracy and performance than the DKZ type has improved significantly.
Sleeve valve with good stability, not easy to produce vibration, low noise, temperature-sensitive features such as single seal type for more stringent requirements, the pressure difference is not clean media occasions. Double sealed type for leaky lax requirements, the pressure difference between the larger clean media occasions. Small hole throttling type, can be used for low noise valve. Widely used in electric power, metallurgy, chemical, petroleum, environmental protection, light industry, equipment and other industries.
Second, The Electronic Electric Sleeve Control Valve Main Technical Parameters and Performance Indicators
| Nominal diameter mm | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| Seat diameter mm | 26 | 32 | 40 | 50 | 66 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| Rated flow coefficient kv | Straight type | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 | 1100 | 1760 |
| Equal percentage | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1000 | 1600 | |
| Nominal Pressure (MPa) | 0.6, 1.6, 2.5, 4.0, 6.4 | ||||||||||||
| Travel (mm) | 16 | 25 | 40 | 60 | 100 | ||||||||
| Flow Characteristics | Straight line, equal percentage, quick open | ||||||||||||
| Operating Temperature ℃ | -40 ~ 230 ℃ (room temperature type), heat sink type 230 ~ 450 ℃ (medium temperature type), special order -100 ~ 600 ℃ | ||||||||||||
| Flange size | Compliant with JB78-59, JB79-59, JB / 79.1-94, JB, ANSI, JIS, DIN and other standard order production | ||||||||||||
| Body Material | WCB (ZG230-450), ZG1Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti CF8 CF8M | ||||||||||||
| Spool Material | 1Cr18Ni9, SS304, 0Cr18Ni12Mo2Ti, SS316, ZG1Cr18Ni9Ti | ||||||||||||
| Body Type | Straight sleeve cast ball valve | ||||||||||||
| Upper Valve Cover Type | Ordinary (normal temperature), hot (medium temperature), long neck (low temperature) | ||||||||||||
| Equipped with Electric Actuator Model | PSL | PSL-202 | PSL-204 | PSL-208 | PSL-312 | PSL325 | |||||||
| 361L | 361LSA-20 | 361LSB-30 | 361LSB-50 | 361LSC-65 | 361LSC-99 | ||||||||
| Explosion-proof | 361LXA-20 | 361LXB-30 | 361LXB-50 | ||||||||||
2, the working temperature, nominal pressure, nominal diameter beyond the scope of the list of products can be resolved with the company to solve
Third, The Electronic Electric Sleeve Control Valve A Main Technical Parameters
| Model | Rated output force | Speed mm / s | Technical Parameters | ||||
| PSL | 361L | PSL | 361L | PSL | 361L | PSL | 361L |
| 201 | 361LSA-08 361LXA-08 | 1000 | 800 800 | 0.25 | 4.2 4.2 | Power supply: AC220V 50Hz Input signal: DC4-20mA DC1-5V (signal line with shielded wire) Output signal: DC4 ~ 20mA Protection class: IP67 With hand wheel | Power supply: AC220V 50Hz Input signal: DC4-20mA DC1-5V (signal line with shielded wire) Output signal: DC4 ~ 20mA Protection class: considerable IP55 Explosion-proof mark: Exd Ⅱ BT4 with handle |
| 202 | 361LSA-20 361LXA-20 | 2000 | 2000 2000 | 0.50 | 2.1 2.1 | ||
| 204 | 361LSB-30 361LXB-30 | 4500 | 3000 3000 | 0.50 | 3.5 3.5 | ||
| 208 | 361LSB-50 361LXB-50 | 8000 | 5000 5000 | 1.00 | 1.7 1.7 | ||
| 312 | 361LSC-65 | 12000 | 6500 | 0.60 | 2.8 | ||
| 325 | 361LSC-99 | Decisions.ither synchronization straticates nights nights H.2 nights callings. | 10000 | 1.0 | 2.0 | ||
Fourth, The Electronic Electric Sleeve Control Valve Performance Indicators
| Project | Indicator straight | ||
| Basic Error% | With 361L 2.0; with PSL 0.1 | ||
| Backlash% | 2.5 | ||
| Dead Zone% | 1.0 | ||
| Always Point Deviation% | Electric open | Starting point | ± 2.5 |
| end | ± 2.5 | ||
| Power off | Starting point | ± 2.5 | |
| end | ± 2.5 | ||
| Adjustable Range | 30: 1 | ||
| Rated Stroke Deviation% | 2.5 | ||
| Allowable Leakage L / H | Single seal in line with JB / T7387-94 Class IV less than the rated capacity of the valve × 10-4 double seal in line with JB / T7387-94 Ⅲ level less than the rated capacity of the valve × 10-3 | ||
Fifth, Electronic Electric Sleeve Control Valve to Allow Pressure
| Nominal Diameter (mm) | 25 | 40 | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | |||
| Seat Diameter (mm) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| Implementing Agency | Allowable differential pressure ΔP (MPa) | ||||||||||||
| With PSL | PSL202 | 6.4 3.14 | 6.4 1.92 | 6.4 1.23 | 5.1 0.78 | ||||||||
| PSL204 | 4.31 | 2.76 | 1.76 | 6.4 1.04 | 6.4 0.69 | 5.62 0.44 | |||||||
| PSL208 | 1.86 | 1.23 | 0.78 | 6.4 0.50 | 5.31 0.35 | 3.97 0.20 | |||||||
| PSL320 | 1.26 | 0.87 | 0.49 | 6.4 0.32 | 4.14 0.22 | ||||||||
| With 361L | 361LSA-20 | 6.4 3.14 | 6.4 1.92 | 6.4 1.23 | 6.4 0.78 | ||||||||
| 361LSB-50 | 6.4 1.16 | 6.4 0.76 | 6.25 0.49 | ||||||||||
| 361LSC-65 | 6.4 0.64 | 4.32 0.41 | 3.23 0.28 | ||||||||||
| 361LSC-99 | 0.63 | 0.44 | 0.25 | 3.31 0.16 | 0.27 0.11 | ||||||||
Note: 1, the same grid on the row for the double seal type to allow the pressure difference, the lower row for the single seal type to allow pressure.
2, the actual configuration to be determined according to the specific process parameters. If a clear or allowing the pressure exceeds the maximum working pressure range list, please contact us, appropriate methods solve
Six, Electronic Electric Sleeve Valve Dimensions
| Common Diameter (mm) | 25 | 40 | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | ||
| L (mm) | PN1.6MPa | 184 | 222 | 254 | 276 | 298 | 352 | 451 | 600 | 720 | 820 | |
| PN4.0MPa | 197 | 235 | 267 | 292 | 317 | 368 | 473 | 600 | 760 | 850 | ||
| PN6.4MPa | 210 | 251 | 286 | 311 | 337 | 394 | 508 | 650 | 800 | 870 | ||
| H1 (mm) | 72 | 87 | 92 | 105 | 110 | 127 | 174 | 209 | 300 | 350 | ||
| With PSL | H (mm) | Normal Type | 750 | 765 | 767 | 845 | 857 | 875 | 1025 | 1045 | 1252 | 1545 |
| Heat Sink Type | 900 | 930 | 937 | 1025 | 1042 | 1085 | 1285 | 1305 | 1805 | 1825 | ||
| D (mm) | 176 | 225 | ||||||||||
| Weight (KG) | 23.5 | 33.5 | 40.5 | 69 | 84 | 112 | 189 | 262 | 415 | 635 | ||
| With 361L | H (mm) | Normal Type | 513 | 650 | 652 | 770 | 782 | 800 | 1080 | 1125 | 1345 | 1365 |
| Heat sink Type | 663 | 815 | 822 | 950 | 967 | 1010 | 1340 | 1385 | 1625 | 1645 | ||
| D (mm) | 225 | 310 | ||||||||||
| Weight (KG) | 31 | 49 | 56 | 84 | 99 | 127 | 242 | 315 | 463 | 683 | ||
| Home | About us | Products | Case | News | Service | Contact us
Add：Dong Ou Industrial Area,Yongjia County,Wenzhou,Zhejiang
Copyright ? Jiuding Intelligent Technology Co., Ltd. Zhejiang ICP No. 09095201-4 |
Zhejiang public security reserve No. 33032402001552
